Engineering (Academic) Books

This report presents the results of an analysis, commissioned by the U.S. Department of Energy, of Air Conditioner (AC) efficiency in support of the Super-efficient Equipment and Appliance Deployment (SEAD) initiative. The International Energy Studies group at Lawrence Berkeley National...

This technical report summarizes methodologies, processes, and main assumptions of three building energy modeling programs (BEMPs) for HVAC calculations: EnergyPlus, DeST, and DOE-2.1E. This is a joint effort between Lawrence Berkeley National Laboratory, USA and Tsinghua University, China...

A 73 page reference containing the use of mobile refuge alternatives (RA) for mining applications from the e National Institute for Occupational Safety and Health (NIOSH) Office of Mine Safety and Health Research (OMSHR).

A quick guide on general safety practices when working with engineered nanomaterials.

An engineering book guide on the exposure assessment and control of diesel aerosols and gases in underground mines.

A guide for engineers on how to identify and describe strategies for the engineering control of worker exposure during the production or use of engineered nanomaterials.

This report details the results of a NIOSH investigation on the ability of the Coal Dust Explosibility Meter (CDEM) to accurately predict the explosibility of samples of coal and rock 5 dust mixtures collected from underground coal mines.

An overview on the potential hazards of engineered nanoparticles and measures that can be taken to minimize workplace exposures by the Department of Health and Human Services.

This document was created because the author feels strongly that it is unacceptable that college books will be over $150. Another reason is that the public have to deal with a corrupted judicial system. With that said, this book is actually part of the revolution in die casting by which science...

This document introduces learners to the many features of Multisim. It is a 3-hour course that aims to give learners a basic understanding of the User Interface, Schematic Capture and Simulation. Learners will then be able to see how Multisim fits into a broader PCB design flow.