1. Make sure the MIDI Control device is connected to your MIDI interface. You need to connect the MIDI Out on the remote unit to a MIDI In on your MIDI interface. Depending on the remote unit model, you may also need to connect a MIDI Out on the interface to a MIDI In on the remote unit (this is necessary if the remote unit features “feedback devices” such as indicators, motorized faders, etc.). See the MIDI Control Device specifications in the separate document “VST Remote Control Devices” for details.
2. Pull down the Options menu and select “Setup” from the Remote Setup submenu. The VST Remote dialog appears.3. Select your MIDI Control Device model from the Remote pop-up menu.
A Yamaha 01V selected as Remote Control device.
4. Select the correct MIDI Input from the Input pop-up menu.
5. If necessary, select the correct MIDI Output from the Output pop-up menu. This depends on whether the MIDI Control Device supports “MIDI feedback”, such as motorized faders, indicators, etc.
6. Click OK to close the dialog.
You can now use the MIDI Control device to move faders and knobs, activate mute and solo, etc. The exact parameter configuration depends on which external MIDI Control device you are using, as described in the separate “VST Remote Control Devices” document.