The Stereoecho is a delay with separate settings for the left and right channel. It can also be used as a single mono delay, in which case the maximum delay time will be doubled.
P The Stereoecho accepts a mono input only. It is normally used as a Send Effect.Parameter Delay1
Feedbck1
Link 1-2
Delay 2
Feedbck2 Del2 Bal
Description
The delay time for the left channel. The maximum delay time is 500 ms, unless you link both channels for mono operation, in which case the maximum delay time is 1000 ms - see below (1000ms = 1 second).
The delay feedback for the left channel. Higher values result in a higher number of echo repeats.Activating this switch turns the effect into a mono delay. When Link is on, only the left channel parameters will be available (Delay1, Feedback1, etc).
The delay time for the right channel.
The delay feedback for the right channel.
This parameter determines how much of the left channel output is sent to the right channel input. When set to 0.0 (fully left), then none of the left channel output is added to the right channel input; when it is set to 1.0 ( fully right), the right input receives both its normal source and the complete output of the left channel.
The output level of the left channel delay.The output level of the right channel delay.