• Use the supplied serial cable to connect the SO output on the SW1000XG to the SI input on the DS2416.
Follow the instructions in the documentation included with the cards.
• In the Output Patchbay window, select the “ext. SI” option in the Wordclock section. This will cause the DS2416 card to receive wordclock from the SW1000XG card, ensuring stable synchronization.
Having connected the two cards, you will be able to receive 8 separate audio channels from the SW1000XG and mix them in the DS mixer. These 8 channels appear as the “SUB 1-8” input sources, selectable using the Input pop-up menus for DS channels 9 to 16, or 17 to 24 (see page 29).