Cubase vst- Getting into the Details by - HTML preview

Copying settings between Channels

It is possible to copy all Channel settings for an audio channel and paste it onto another channel. For example, you can copy EQ settings from one channel to another, if you want them to have the same sound. Proceed as follows:

1. Locate the channel you want to copy settings from and click on its channel number button (at the bottom of the channel strip).

 

The button lights up, indicating that the channel is selected.

 

2. Pull down the Edit menu and select Copy (or use the corresponding key command - by default [Ctrl]-[C]).
3. Select the channel you want to copy settings to by clicking on its channel number button in a similar way.
4. Pull down the Edit menu and select Paste (or use a key command - by default [Ctrl]-[V]). All settings are copied to the selected channel.

• If you don’t want to copy the Insert Effects, hold down [Shift] while pasting (i.e. press [Ctrl]-[Shift]-[V], by default).
This pastes all settings except the Insert Effects.

5. If you wish to copy the same settings to several channels, repeat steps 3 to 4. You might for example want to apply the same settings to both channels in a stereo pair.