The Song Start time code position.
This is the position on the time code tape that will make Cubase VST start the song from the beginning. If you for example set this to 0:5:0:0:0 (five minutes) Cubase VST will start from the beginning of the Song when it receives a time code message with this value.
In other words, if Cubase VST receives a time code message of “seven minutes” with the Song Start value suggested above, it will jump to a position two minutes in from the beginning of the Song.
This way sequenced material can be matched to film or video, and you can adjust the relative starting points between e.g. material recorded on an audio tape and Cubase VST.
The Song Start value is in the following format:hours:minutes:seconds:frames:subframes (80 bits).