It is possible to route each bus or send (except Aux 5-6) to any output or any combination of outputs. However, it is not possible to route several different buses to the same output. Output routing is done in the Output Patchbay window:
1. Open the Output Patchbay window.
2. Locate the output you want to access, in the list to the left.
Note that the outputs listed are outputs pairs. The “DS2416” output pairs are connected to the Cubase VST Inputs, while the “IOA” and “IOB” output pairs are outputs on additional i/o units, connected as unit A and B, respectively.
P Even though the Aux Sends are selected in pairs, it is not possible to use them as “stereo sends”, since the pan setting of the channel is not taken into account. If you need stereo sends (for external stereo input effects or stereo monitoring), use the Bus sends in Post Pan mode.