Selection Filters
iii. Failure States
Bodies and Parts
1.2 Workbench GUI
1.3 Preparing Engineering Data
1.4.1 2D and 3D Simulations
1.4.2 More on Geometric Modeling
1.5 Divide Geometric Model Into Finite Elements
1.7 Solve the Finite Element Model
2.2 Start-Up
2.3 Create Body
2.5 Start-up “Mechanical”
2.6 Generate Mesh
2.7 Specify Boundary Conditions
2.8 Specify Loads
2.9 Set up Solution Branch and Solve the Model
2.10 View the Results
3.2 Start-Up
3.3 Creating the 2D Geometry Model
3.6 Set Up Solution Outcome Branch
3.7 View the Results
3.7.1 Perform Simulations
3.8 Modify the Model
3.8.1 Set Up New Supports, Loads
3.8.2 Set Up New Mesh Controls
3.8.3 View the Results
3.9 Structural Error
3.10 Finite Element Convergence
3.11 Stress Concentration
3.11.1 View the Path Results
Examples before beginning our task
4.2 Start-Up
4.3 Create Body
4.3.1 Getting back to the Modeling
4.6 Set Up Solution Outcome Branch
4.7 View the Results
4.7.1 Activating 3D View
4.9 Stress Concentration Factor
4.9.1 Hand Calculations VS Computational Calculations of Stress Concentration
Computational Calculations
4.10 Redefining Mesh
5.5.i Set Up Supports, Loads
5.6.i Set Up Solution Outcome Branch
5.7.i View the Results
ii. Solid Elements
5.6.ii Set Up Solution Outcome Branch
iii. Surface Elements
5.5.iii Set Up Supports, Loads
iv. Type of Elements Comparison
6.2 Start Up
6.3 Create Body
6.6 View the Results
6.7 Modify Model